Purchase online or call our office and speak to Gary.

Why HogLeverage?

​The ability to adjust clutch and brake lever locations to suit the size of your hands is extremely important for riding comfort and safety.  With Oberon levers designed to fit the Harley Davidson model line this adjustment is achieved by a fingertip controlled knob offering eight positions which allows more than 1 inch of adjustment.  This is extremely useful with bikes equipped with a hydraulically actuated clutch and for people with smaller hands or limited mobility. The unique RADIAL CAM® design achieves this extraordinary adjustment range with ease due to its close tolerance design.  The internal adjustment cam is hard anodized for longevity, reliability, and smooth adjustment transition.
​
Hogleverage offers Oberon adjustable brake and clutch levers with a Black Anodized finish and exclusively offers a highly polished Chrome finish.  You will also be offered a selection of colors for the adjusting knob.  Most popular is the black adjusting knob on black levers and silver adjusting knob on chrome levers. BUY NOW
​
Made in England and assembled here in the USA, the fit, finish, and quality of these levers is outstanding. You won't be disappointed.

Hogleverage currently offers levers for virtually all Harley models from years 1996 through 2018. If a lever is not listed for your Harley, please contact HogLeverage for advice.

CLICK HERE FOR USER TESTIMONIALS

Things to Consider:


​Please note:  if the clutch lever is adjusted to a setting very close to the grip, in some circumstances it can cause the clutch to not fully disengage and/or defeat the start-in-gear function, if this is a concern please contact Hogleverage for advice.
 
Lever length is approximately 7" from center of pivot point to end of lever ball and is comparable to the standard lever.  These levers include the “Airo” slot.
 
​To insure proper fitment care is needed to make certain the correct lever is ordered.  This can be complex due to the wide variety of Harley model variations; CVO models can be particularly tricky.  If you are uncertain please contact Hogleverage for advice.
 
Installation is relatively straight forward for anyone with moderate mechanical ability and certain hand tools.  Included with the levers is a one page instruction sheet which references  the bike workshop manual.  Care must be taken to avoid damage to delicate microswitches.  Also it is extremely important, where applicable, to move the pivot bushing and any anti-rattle shims from the original lever to the Oberon lever.  This step is often missed, especially by experienced mechanics who tend to ignore instructions, and will result in less than desirable results.

Lever Adjustment
Personal judgement is needed in selecting the best lever position for your specific situation.  

For the clutch lever, it is necessary for you to select the position which has the best compromise between hand comfort and full clutch disengagement.  If the bike/trike does not shift smoothly from neutral to 1st gear it is an indication to try a different adjusting position. If you have a cable actuated clutch, our levers work best with the cable free play set within the factory tolerance.  Extra cable slack can be problematic.

For the brake lever, it must never be adjusted to a position that could allow the lever to contact the grip when maximum braking is needed.

If lever adjustment is a concern please Contact Hogleverage for advice.
Shipping:
Orders are normally shipped within 2 business days from receipt of order.  All orders within the continental U.S. are shipped by ground from Huntington Beach, California at a flat rate of $12 per order.  For orders to be shipped outside of the continental U.S., or for faster shipping options please place order by telephone at 714-842-2603

Return Policy:
If you are not 100% satisfied with your purchase for any reason, you may return it undamaged, in the original packaging, for refund or exchange. All returns require prior approval. All requests for returns must be made within 30 days of purchase date. Buyer pays return shipping.

MEET HOGLEVERAGE:
​a dIVISION OF COAST FABRICATION, INC.

Recently, we here at Coast Fabrication, Inc. have applied our extensive racing and fabrication heritage to several "project" motorcycles. One such endeavor was  co-owner Jeff Heywood's 2008 Harley Davidson Rocker. Both our work on this bike and discussions with other Harley riders led us to research, develop, and make available select parts and resources for this and other Harley Davidson motorcycles.
​
The parts we offer look good, but more importantly, increase functionality, comfort and performance: They are for motorcycles that are meant to be ridden. We test them ourselves before offering them for sale.

Learn more about Coast Fab at www.coastfab.com

wOMEN rIDERS nOW

• Adjustable Brake and Clutch Levers for Small Hands
• Video Review


Hog Leverage Terms of Sale: All items sold by HOGLEVERAGE are warrantied to be free from defects in material or workmanship and to conform to all applicable standards. Since HOGLEVERAGE has no control over how they are specified, installed, used, or maintained, all warranties of merchantability and fitness are hereby expressly excluded. Our liability is limited to replacing defective material or refunding the invoiced value of the material sold. In no case shall our liability exceed the invoiced value of the goods sold. Acceptance of any and all goods invoiced by HOGLEVERAGE constitutes acceptance of these conditions and exclusions.